-
Address:
Rajendra Nagar, Ghaziabad
-
Mail us:
info@rudraaenterprises.com
-
Phone:
+91 9773793859
- GET A QUOTES
Water Tankers
Technical Specifications of Water Tankers
Technical Parameter | RE MS WT 3KL | RE MS WT 4KL | RE SS WT 3KL | RE SS WT 4KL |
---|---|---|---|---|
Tank Material | Metallic Steel | Stainless Steel | Stainless Steel | Stainless Steel |
Actual Thickness of MS / SS Sheet used for fabrication of Water Tanker in mm | 3 mm | 3 mm | 3 mm | 3 mm |
Number Of Baffles Plates in the tank for MS and SS | 2 | 2 | 2 | 2 |
Actual Thickness of GRP used for fabrication of Water Tanker in mm | 6 mm | 6 mm | 6 mm | 6 mm |
Water Tanker Mountings | on the trailer subframe using Rubber Metacones. The rubber metacones shall facilitate to absorb the jerks and bending torsions in expansion as well as compression mode without high deflection. | on the trailer subframe using Rubber Metacones. The rubber metacones shall facilitate to absorb the jerks and bending torsions in expansion as well as compression mode without high deflection. | on the trailer subframe using Rubber Metacones. The rubber metacones shall facilitate to absorb the jerks and bending torsions in expansion as well as compression mode without high deflection. | on the trailer subframe using Rubber Metacones. The rubber metacones shall facilitate to absorb the jerks and bending torsions in expansion as well as compression mode without high deflection. |
Covered Manhole Diameter In mm (Minimum) | 450 | 450 | 450 | 450 |
Diameter Of Cleaning Hole At Bottom Of Tank In mm (Minimum) | 250 | 250 | 250 | 250 |
Ladder provision on the back side of the water tanker | Optional | Optional | Optional | Optional |
Type of Trailer | Balanced Trailer (Double Axle) | Balanced Trailer (Double Axle) | Balanced Trailer (Double Axle) | Balanced Trailer (Double Axle) |
Number of Wheels | 4 | 4 | 4 | 4 |
Recto Reflective Marking (tapes) as per AIS -090 | YES | YES | YES | YES |
Lighting and Lighting -signalling device as per AIS- 062 | YES | YES | YES | YES |
Trailers shall be fitted with Rear Under Run Protective Device (RUPD) confirming to IS 14812 (latest) | ISI marked ISMC channel used for fabrication of Chassis and frame mounting on chassis | YES | YES | YES |