Sewer Suction Cum Jetting Machine

Sewer Suction Cum Jetting Machine Trailer or Chassis Mounted

Sewer Suction Cum Jetting Machine

Truck chassis mounted suction-cum-jetting combination machine available in multiple volumetric capacities of clean water and sludge collection tank. This equipment’s are capable of efficiently working is sewer lines of diameters ranging from 200-1000 mm.

Siphoning the liquid and solid effluents into the equipment’s sludge collection tank under high vacuum, from surcharged manhole chambers, sewer and storm water drain lines, septic/sump tanks and gully pits and transporting the same to any desired disposal site for emptying under gravity/positive pressure/tipping of sludge tank.

It is capable of De-Chocking and De-Silting civic, Industrial drains and sewer lines by using the principle of hydrodynamic cleaning by injecting high pressure water into the lines through a suitably dimensioned sewer jetting hose and special cleaning nozzles

Product Details:

Recommended Chassis	Required GVW as per Capacity & Payload cabin chassis with PTO & In Case of Trailer then required suitable Tractor with PTO Provision
Tank	Capacity- from 1000 Ltr. To 10,000/- Liters as per customer requirement Shape- Cylindrical Cross Section with Dished Ends, Material- MS plate 5 mm thick confirming to IS 2062 Grade ‘A’ Standards, 5 mm thick for dished end, Drain valve- 75mm
High Pressure Jetting Pump	Imported Make Only Discharge Capacity – 100 LPM @ 150 Bar to 250 LPM @ 170 Bar The High Pressure Jetting Pump Will Be Driven by Split Shaft Total Power Take Off Unit Suitable for Cleaning Drain Lines of Diameters Ranging from 100mm to 400mm Type- Triplex Plunger Pump Suction filter, Unloaded Valves & safety valve provided to protect the high pressure jetting system
Accessories & Safety Devices	Pressure Relief Valve, Safety valves, Unidirectional Valve, Primary Shut Off, Secondary Shut-Off, • Suction And Return Line Filters, Direction Control And Flow Control Valves, Stainless Steel Filters, Online Pilot Operated Check Valves Etc.
Jetting Hose & Hose Reel	Type- Pivoted Type Rotation- 90°, A Single Length,60 Meters Long with 3/4” Of internal Dia., High Pressure Thermo-Plastic (Jetting) Hose Working Pressure 130 Bar, Bursting Pressure: 400 Bar Construction of Core: Thermoplastic Techno Polymer Core with Two Braided High Tensile Fiber Pressure Reinforcement. Outer Cover Made Of Thermoplastic Synthetic Techno Polymer, A kit of two cleaning nozzles, (a) Round - head - nozzle (b) Conical - head - nozzle, capable of removing heavy chokes should also be supplied with the equipment
Vacuum pump	Make – JUROP/ Moro, Delivery: Min. 9000 LPM Free Air Flow, Vacuum: 92 %, Pressure: 1.5 Bar, Lubrication: Automatic Lubrication, cooling: Air Cooled, Capable To Empty Chambers Up To 7 Meters Depth, Operate - Blow Back Arrangement, Pump provided with - Injection Air Cooling System, Automatic Lubricating Oil Pump, Incorporated Check Valve, Incorporated 4 - Way Valve
Suction Hose	Shutoff valve – 100 mm, A total of 15 m length of non-collapsible heavy duty flexible suction hose reinforced with hard spirals of rigid PVC of 75 mm internal diameter
Pump Drive	Drive for The Jetting Pump Will Be from A New Generation Total Power Take Off Unit, Split shaft PTO, The P.T.O. Will Be Capable Of Transmitting The Full Engine Torque Of The Vehicle
Hydraulic System	Hydraulic Pump: Gear type
Painting / Finishing Of The Complete Equipment	Both, Exterior and Interior of the Tank Will Be Sand Blasted Prior to Spray Painting. The Tank Exterior Shall Be Spray Painted with Two Coats of Superior Quality Anti-Corrosive Primer and Two Coats of Enamel Metal Paint of Reputed Make. The Tank Interior Will Be Coated with 2 Coats of Anti-Corrosive primer & Grey Epoxy Paint The Whole Equipment With Cabin Shall Be Painted With Two Coats Of Enamel Paint In Golden Yellow Color.

Get Best Quote Request A Callback

Address:

Mail us:

Phone: